Split system, wall mounted condensing unit, ceiling-mounted evaporator.

Electronic control panel.

Expansion device: thermal expansion valve.

Crankcase heater.

Condenser fan pressure switch.

Liquid separator with heat exchanger.

Pre-arrangement for room lighting connection.

Pre-arrangement for door switch connection.

Cable for door heater connection on low temperature units.

All units are equipped with a fixed calibration low pressure switch; all three-phase units are also provided with a fixed calibration high pressure switch.

Remote panel: already connected to the unit and provided with a 5 meters long cable (on request extension up to 20 meters).

Direct drainage of condensate.

Drain heater on all medium and low temperature units.

Units recommended for use at ambient temperatures not lower than 10°C. Suitable accessories are required for use at temperatures below 10°C. In case of outdoor installation it is necessary to protect them from the weather.

Optionals:

Special voltage.

Water-cooled condenser: units equipped with water-cooled condenser are also provided with a pressure controlled water valve, a fixed calibration high pressure switch (even on single-phase units), as well as a compressor cooling fan (low temperature units only).

Voltage monitor.

Condenser fan speed regulator.

Switchboard heater.